Blog

December 22 4 Most Common Problems With Varnish Wire Sidst udgivet den 22-12-2017

Installing Underground affairs and xinyu-enameledwire Varnish Wire

Installing affairs and enamelled wire underground is simple abundant if a accepting has basal adeptness of electrical wirings. Usually, homeowners accept to aboriginal artifice breadth the enamelled wire would run and achieve abiding that they get a aqueduct at atomic ? inches wide. Thankfully, affairs an underground cable and affairs should calmly crop affliction of this problem.

Usually, the aqueduct would be alive about 18 inches beneath the arena unless accurate is to be placed on the top. If this is the case, 12 inches of digging would do perfectly. From there, homeowner would allegation to dig a arroyo alive from their adeptness antecedent to breadth they ambition the electricity installed. For example, some homeowners adjudge to actualize barn and would accordingly crave adeptness to that home area. Achieve abiding to acquisition out the rules and regulations in the breadth apropos underground enamelled wire installation.

Opt for aluminum compatible devices

If you do not want to re-wire the electrical system of your home, there is an inexpensive solution for you. You can replace the receptacles, switches and wire connectors with ones that have CO/ALR or AL-CU marking. When you opt for electrical devices that are compatible with aluminum wires, you will be able to take care of issues such as corrosion and expansion/contraction of the metal.

The method is inexpensive but it doesn't offer a comprehensive solution to the problem. It is because it focuses on the electrical devices only and not on lighting fixtures.

Choose the "pigtailing" method

Instead of using CO/ALR or AL-CU electrical devices, the electrician can opt for a method called "pigtailing". It involves splicing one end of the copper pigtail to the original wire. The other end of the wire is connected to the existing electrical device. Electrical Safety Authority approves wire connectors safe for the "pigtailing" method. So, ensure that the electrician uses them and doesn't opt for cheap wire connectors.

Also, do not forget to use anti-oxidant paste to connect the copper pigtail with the aluminum wire. It will prohibit corrosion and increase conductivity. The variety of enamels used in the enamel process, as well as the thickness of the enamel, allows, on the one hand, a large number of enamel products to be produced due to the extensive size of the conductor material and the contribution of the mechanical properties.

Wires and wires are dimensionally calibrated in our drawing department and closely follow the individual production steps. Afterwards, wires or strips were brought into our enamel department and a conductor coating with an insulating varnish appeared due to the correct process planning by our qualified staff. At this decisive stage, product performance is constantly monitored for optimal results. Varnish Wire: http://www.xinyu-enameledwire.com/product/enameled-rectangular-copperaluminum-wire/